It is not permitted to generar bono ley 8480 provincia de buenos aires modify the RTR car or white kit in any way.
Including the white kits released by Scaleauto.
You may use a thread locking material to prevent screws falling out, but all screws must be tight and fitted as designed.
Only Stock Front tires may be hardened horaire d'ouverture géant casino montpellier and polished and may be glued to the rim.Please take care that you have to use pinions with 1,5mm holes.Scaleracing Philosophy for 1/24th scale Model Car Racing.Motors may not be broken in or lubricated before the race; all work on motors will be done under green while the race is running.These races are open to all versions of these GT2/3 cars.16mm) Rear wheels: Scaleauto Klasse 1Slotracing dimensions : .2x16mm (hub dia.The car can not be held up at the front by the braid when checking this measurement.The new Scaleauto GT 3 Chassis cars amendments.Cockpit: hard plastic, resin or lexan.Any other repair should be shown to the Race Director and approved or fixed by repairing or replacing parts.PIT table: Once technical inspection is complete and all cars are in Parke Ferme this will become the PIT table.16mm) - Hard sc-2422p "Please see the advices from the race committee which tyres compound have to be used.No other part of the car may protrude into the Slot at any time.A form of racing where the Racer not only desires to perform but also understands it is critical to protect his car from damage.The ground clearance during and at the end of the race must never be less than.#Front tires could be hardened with super glue, but the original juegos de preguntas y respuestas por dinero letters need to be visible.
The goal is to create equal performing cars, motor and gear ratio wise to prevent costs rising due to motor wars.
They may be cleaned with Scaleauto tire cleaner SC-5300 at the Technical Table only.